Fasteners & Industrial Supplies in Dallas-Fort Worth & Houston - Screws, Nuts, Bolts, Anchors & Supplies
Every fastener. Every application. Delivered fast.
Screws we stock.
-
Machine Screws are uniform-thread screws used with tapped holes or nuts for precise fastening. Applications: electrical enclosures, machinery, panels.
Wood Screws are coarse-thread screws designed to bite directly into wood. Applications: framing, cabinetry, carpentry.
Sheet Metal Screws are sharp-thread screws that cut into thin metal or plastic. Applications: HVAC ducting, metal panels, appliances.
Self-Tapping Screws are screws that form their own threads during installation. Applications: plastics, thin metals, light assemblies.
Self-Drilling (TEK) Screws are drill-point screws designed to fasten into metal without pre-drilling. Applications: steel studs, roofing, metal buildings.
Drywall Screws are hardened screws optimized for attaching drywall to wood or metal studs. Applications: interior walls, ceilings.
Deck Screws are corrosion-resistant screws designed for exterior wood applications. Applications: decks, fences, outdoor structures.
-
Structural Screws are high-strength screws engineered to replace lag bolts in load-bearing connections. Applications: beams, ledger boards, structural joints.
Lag Screws (Lag Bolts) are large, heavy-duty screws used for high-load fastening into wood. Applications: timber framing, mounting equipment, posts.
Concrete / Masonry Screws are hardened screws designed to cut threads into concrete, brick, or block when installed in a pre-drilled hole. Applications: mounting brackets, rails, fixtures, anchors.
-
Socket Screws (Allen) are high-strength screws driven by an internal hex socket for precision and high-torque applications. Applications: machinery, tooling, industrial equipment.
Set Screws are headless screws used to secure components onto shafts or within assemblies. Applications: pulleys, collars, gears, knobs.
Shoulder Screws are precision screws with a smooth shoulder used for alignment, pivoting, or guiding motion. Applications: hinges, pivots, guides, sliding assemblies.
Thumb Screws are hand-tightened screws designed for quick access and tool-free adjustment. Applications: access panels, covers, enclosures.
Captive Screws are screws designed to remain attached to a component after loosening to prevent loss. Applications: service panels, enclosures, access doors.
Micro / Precision Screws are small-diameter screws used in electronics and delicate assemblies. Applications: electronics, instruments, medical devices.
Plastic Screws are non-metallic screws used where corrosion resistance, electrical insulation, or weight reduction is required. Applications: electronics, chemical environments, light-duty fixtures.
-
Screws are stocked to support a wide range of industrial, commercial, and construction applications, including standard, structural, and specialty configurations.
Capabilities include multiple diameters, lengths, thread types, head styles, and drive styles to meet application-specific requirements.Materials include carbon steel, alloy steel, stainless steel, and specialty materials, with finishes and coatings such as zinc, hot-dip galvanized, black oxide, and corrosion-resistant options.
Specification support includes ASTM and SAE-compliant screw types, suitable for load-bearing, environmental exposure, and inspection-driven projects.
Wood, metal, drywall, decking, masonry, and precision screw applications are supported, with sourcing available for non-stock sizes, coatings, and project-specific requirements.
Bolts we stock.
-
Hex Bolts are externally threaded fasteners with a hex head designed to be used with a nut or tapped hole.
Applications: structural steel, machinery, construction assemblies.Carriage Bolts are bolts with a smooth, rounded head and square neck that prevents rotation during installation.
Applications: wood-to-wood, wood-to-metal, fencing, decks.Flange Bolts are bolts with an integrated washer under the head to distribute load and reduce loosening.
Applications: automotive assemblies, machinery, structural connections.Square Head Bolts are traditional bolts with a square head designed for wrench grip and historical or utility use.
Applications: restoration projects, utility hardware, heavy equipment.U-Bolts are U-shaped bolts with threads on both ends designed to clamp around pipes or round objects.
Applications: pipe mounting, conduit support, exhaust systems.Eye Bolts are bolts with a looped head designed for lifting, rigging, or anchoring.
Applications: hoisting, tie-downs, overhead support. -
Structural Bolts are high-strength bolts engineered for load-bearing steel connections.
Applications: steel framing, bridges, structural joints.Anchor Bolts are bolts embedded in concrete to secure structural elements.
Applications: columns, base plates, foundations.Heavy Hex Bolts are thicker, stronger hex bolts designed for structural applications.
Applications: bridges, steel buildings, infrastructure.Stud Bolts are headless bolts threaded on both ends or fully threaded for flange and pressure connections.
Applications: piping systems, pressure vessels, refineries. -
Socket Head Cap Screws are high-strength bolts with an internal hex drive used where clearance is limited.
Applications: machinery, tooling, industrial equipment.Shoulder Bolts are precision bolts with an unthreaded shoulder for alignment and rotational movement.
Applications: pivots, hinges, guides, moving assemblies.J-Bolts are J-shaped anchor bolts designed for embedding into concrete.
Applications: concrete foundations, pole mounting.T-Bolts are bolts with a T-shaped head designed to slide into slots or channels.
Applications: machine tables, T-slot tracks, fixtures.Elevator Bolts are bolts with a large, flat head designed to prevent pull-through in soft materials.
Applications: conveyor systems, grain elevators, belts.Plow Bolts are countersunk bolts with a square neck designed to sit flush in metal surfaces.
Applications: snowplows, heavy equipment, wear plates. -
Bolts are stocked in standard, heavy-duty, and structural configurations to meet engineering and construction demands.
Capabilities include hex, heavy hex, and specialty bolt types in multiple diameters, lengths, and thread styles.Materials include carbon steel, alloy steel, and stainless steel, with finishes such as zinc, hot-dip galvanized, and black oxide for corrosion and environmental protection.
Inventory includes SAE Grades 2, 5, and 8, as well as ASTM-rated structural bolts including A307, A325, and A490, suitable for load-rated and code-compliant assemblies.
Structural steel, machinery, anchoring, and infrastructure applications are supported, with sourcing available for project-specific grades, sizes, and documentation.
Nuts, washers & anchors we stock.
-
Hex Nuts are six-sided internally threaded fasteners used with bolts or threaded rod.
Applications: structural assemblies, machinery, general fastening.Heavy Hex Nuts are thicker, wider hex nuts designed for high-strength structural bolting.
Applications: steel construction, bridges, infrastructure.Lock Nuts are nuts designed to resist loosening from vibration or movement.
Applications: machinery, automotive, equipment.Nylon Insert Lock Nuts (Nylock) are lock nuts with a nylon collar that increases thread friction.
Applications: vibration-prone assemblies, automotive, light machinery.Jam Nuts are thin nuts used to lock another nut in place.
Applications: threaded adjustments, locking assemblies.Flange Nuts are nuts with an integrated washer to distribute load and protect surfaces.
Applications: automotive assemblies, machinery, sheet metal.Coupling Nuts are long nuts used to join two threaded rods or bolts end-to-end.
Applications: rod extensions, suspended systems.Cap Nuts (Acorn Nuts) are closed-end nuts designed to cover exposed threads.
Applications: finished assemblies, safety covers, decorative hardware.Wing Nuts are hand-tightened nuts with extended “wings” for tool-free adjustment.
Applications: access panels, temporary fixtures.Square Nuts are four-sided nuts designed for increased surface contact and wrench grip.
Applications: channels, older equipment, utility hardware.T-Nuts are nuts designed to fit into slots or wood for hidden fastening.
Applications: furniture, jigs, T-slot systems. -
Flat Washers are thin discs used to distribute load and protect surfaces under fasteners.
Applications: general fastening, structural assemblies.Hardened Washers are heat-treated washers designed for use with high-strength bolts.
Applications: structural steel, heavy hex bolting.Lock Washers are split or toothed washers designed to resist loosening.
Applications: machinery, vibration-prone assemblies.Fender Washers are washers with an oversized outer diameter for load distribution over soft materials.
Applications: sheet metal, wood, plastics.Structural Washers are thick, hardened washers used in structural bolting systems.
Applications: steel construction, bridges.Belleville Washers are conical washers designed to maintain tension under load.
Applications: spring loading, vibration control.Finishing Washers are decorative washers used with flat or oval head screws.
Applications: architectural hardware, visible fasteners.Sealing Washers are washers with bonded rubber or neoprene used to create a watertight seal.
Applications: roofing, exterior panels, enclosures.Wave Washers are spring washers designed to provide light preload in compact spaces.
Applications: electronics, light assemblies.Square Washers are flat, square-profile washers designed for heavy-duty or structural use.
Applications: timber framing, utility hardware. -
Wedge Anchors are mechanical anchors that expand against concrete when tightened for high holding strength.
Applications: structural connections, machinery mounting, handrails.Sleeve Anchors are expansion anchors that spread load across masonry surfaces.
Applications: concrete, brick, and block installations.Drop-In Anchors are internally threaded anchors set flush into concrete using a setting tool.
Applications: overhead installations, threaded rod fastening.Concrete Screws are hardened anchors that cut threads into concrete when installed in a pre-drilled hole.
Applications: light to medium-duty concrete fastening.Hammer Drive Anchors are anchors driven flush with a hammer for quick installation.
Applications: signs, fixtures, electrical boxes.Lag Shield Anchors are expansion shields used with lag screws in masonry.
Applications: brick, block, concrete mounting.Chemical Anchors (Epoxy Anchors) are adhesive anchors that bond threaded rod or rebar into concrete.
Applications: high-load anchoring, seismic and structural applications. -
Nuts, washers, and anchors are stocked to support structural, industrial, and commercial fastening systems across wood, steel, and concrete applications.
Capabilities include standard and heavy-duty nut styles, flat and hardened washers, and mechanical and adhesive anchoring solutions for a wide range of load and installation requirements.
Materials include carbon steel, alloy steel, stainless steel, and specialty materials, with finishes such as zinc, hot-dip galvanized, black oxide, and corrosion-resistant coatings.
Specification support includes ASTM and SAE-compliant nuts and washers, including structural and hardened types, as well as ASTM-rated mechanical and adhesive anchors suitable for load-bearing and code-driven applications.
Applications supported include structural steel connections, machinery assembly, concrete anchoring, and inspection-driven projects, with sourcing available for non-stock sizes, grades, and project-specific requirements.